| | | |
|
Auction catalogs are usually available 3-5 days before the actual auction.
Please Notify Me by email when the information is available.
|
RICHARDS MACHINE TOOL COMPANY, INC.: Large Parts Production / Precision Machining Facility | | THURSDAY, APRIL 17TH AT 10am | | 3753 walden avenue lancaster, ny 14086 (just outside of buffalo) (MAP)
|
Register | On-site Bidders: Register day of auction. Arrive at least 30 minutes prior to the auction start time and register at the auction office. | Online Bidders: Register here Register 24 hours prior to start of auction. Must have deposit or bank letter of guarantee to bid. Call for wire instructions. | Inspection | Day prior to auction from 9AM - 4PM | Buyers Premium | On-site: 15% Buyer's Premium (will be added to bid price) | Online: 18% Buyer's Premium (will be added to bid price) | Taxes | Sales tax rate is 8.75%. We will charge local sales tax unless you have your tax exempt number with you or have it faxed to our office. Our fax number is 513/738-0221. | Lodging | Directions | Best Western (800) 780-7234 4630 Genesee Street 14225
Hilton Garden Inn (800) 445-8667 4201 Genesee Street 14225
Holiday Inn (888) 897-0088 4600 Genesee Street 14225
| Left (Northeast) out of Airport, proceed 2 miles. Turn right onto Transit Road (78S). Go 1-3/4 miles & turn left onto Walden Ave. Go 1-1/2 mile to Richards Machine on the right. Watch for auction signs. | Removal of Purchases | Removal begins after the last item is sold and lasts for one hour (or until 5PM). Removal will continue the next morning and on all weekdays from 8AM to 5PM. Last day for removal is Friday, 4/25/14. RIGGING AND REMOVAL IS THE RESPONSIBILITY OF THE BUYER. Small, carryout items, should be removed immediately after the auction or the day after the auction. Anyone, either a buyer or rigger, who uses a powered vehicle to remove anything from the auction site, will need a certificate of insurance. | CERTIFICATE OF INSURANCE | Riggers | HOLDER: Richards Machine Tool Company 3753 Walden Avenue, Lancaster, PA 14086 ADDITIONAL INSURED: Myron Bowling Auctioneers, Inc. RE: (auction site address) AMOUNTS: General Liability - $1,000,000 each occurrence $2,000,000 General Aggregate Business Auto - $1,000,000 Combined Single Limit | LTR Rigging & Hauling (716) 694-7010 Gina, gina@ltrusa.com
Farr's Rigging (814) 698-2014 Clifton Farr, Sr., farrsinc@aol.com
Pedowitz Machinery Movers (718) 923-1862 Pat Fahey, patfahey@pedowitz.com
United Services Group (585) 473-4820 Jim Dooley, unitedmec@gmail.com | STATE AUCTION LICENSE NUMBER(S) | IN CONJUNCTION WITH | Myron C. Bowling - AU003150R Myron Bowling Auctioneers, Inc. - AY000090L | | follow us on twitter If you have questions, click here Answer-pro@myronbowling.com | | PHOTO Gallery & Specifications | Photos & Specs |
HORIZONTAL MACHINING CENTERS | 2007 HAAS EC1600-3X CNC HMC, 36” x 64” T-Slot Table, 39” x 72” Drilled & Tapped Sub-Table, #50 Taper, Spindle Speeds to 6,000 RPM, Travels: 64” X-Axis, 50” Y-Axis, 32” Z-Axis, 30-Position ATC, Renishaw Touch Probe, Coolant System, Air Blow Off, HAAS CNC Control w/Remote Pulse Generator, S/N 2052240 LOT 822 | |
MATSUURA MC-900H-63-PC25 5-Axis CNC HMC, (2) 24-3/4” Pallets, .001° Rotation, Travels: 36” X-Axis, 29” Y-Axis, 29” Z-Axis, #50 Taper, Spindle Speeds to 4,000 RPM, 50-Position ATC, Fanuc 11M CNC Control w/Remote Pulse Generator, S/N 86015454 LOT 828 | |
OKK MCH-450 CNC HMC, (2) 15-1/2” Pallets, Travels: 25” X-Axis, 17” Y-Axis, 15” Z-Axis, #40 Taper, Spindle Speeds to 45-6,000 RPM, 30-Position ATC, OKK CNC Controls, S/N 149 LOT 776 | |
TSUDAKOMA RNCM-301R 4th Axis Rotary Table, 12” Diameter Table, S/N 611747 LOT 829 | |
CNC VERTICAL MACHINING CENTERS | MAZAK Powercenter V-12 CNC VMC, 27” x 55” Table, Travels: 39.3” X-Axis, 19.6” Y-Axis, 19.6” Z-Axis, #50 Taper, Spindle Speeds to 3,150 RPM, 20-Position ATC, Fanuc 6M CNC Pendant Control, S/N 48189 LOT 831 | |
MAZAK VQC-20/50B CNC VMC, 22” x 49” Table, Travels: 39.37” X-Axis, 19.68” Y-Axis, 12.59” Z-Axis, #50 Taper, Spindle Speeds to 3,150 RPM, 24-Position ATC, M-2 CNC Control, Tool Presetter, S/N 56585 LOT 770 | |
CNC LATHES | (2) HAAS HL-6 Large Capacity CNC Lathes, 15” 3-Jaw Power Chucks, 44” (Approx.) Maximum Distance to Tailstocks, 25” Over Cross Slide, 40” Swing Over Bed, 10-Position Turrets, 4-1/2” Spindle Bores, Tool Presetters, HAAS CNC Controls w/Pulse Generator, S/N 61511 (1998) LOT 805 & S/N 61647 (1998) LOT 804 | |
OKUMA LB15 CNC Lathe, 8” 3-Jaw Power Chuck, 6” Swing Over Bed, 24” Distance to Tailstock, 12-Position Turret, Chip Conveyor, OSP 5000 L-G CNC Control, S/N 3540 LOT 793 | |
OKUMA LC10 CNC Chucker Lathe, 6” 3-Jaw Power Chuck, 8-Position Turret, OKUMA CNC Control, S/N 5504-0492 LOT 790 | |
HORIZONTAL BORING MILLS | (2) SHIBAURA BFT-13CW2 5” HBMs, 47” x 98” Tables, Travels: 100” X-Axis, 72” Y-Axis, 85” Z- Axis Travel, #50 Taper, Spindle Speeds to 1,200 RPM, 2-Axis DRO’S, Operator Pendant Controls, S/N 2733 (1977) LOT 924 & S/N 2737 (1978) LOT 925 | |
SHIBAURA BT-10BR 4” HBM, Built-In 55” x 63” Rotary Table, Travels: 72” X-Axis, 60” Y-Axis, 20” Z-Axis Travel, #50 Taper, Spindle Speeds to 1,000 RPM, NEWALL 3-Axis DRO, Operator Pendant Control, S/N 6767 (1978) LOT 895 | |
SHIBAURA BT-8D(R) 3-1/8” HBM, Built-In 35” x 41” Rotary Table, Travels: 40” X-Axis, 40” Y-Axis, 36” Z-Axis Travel, #50 Taper, Spindle Speeds to 1,000 RPM, NEWELL 3-Axis DRO, Operator Pendant Control, S/N 151255 (1980) LOT 905 | |
VERTICAL BORING MILLS | FRORIEP 105” VBM, 95” 4-Jaw Table, (2) Ram Heads, Approx. 60” Under Rail, Table Speeds to 48 RPM, S/N W10740 LOT 909 | |
DORRIES 81” SDE160 CNC/Manual VBM, 63” 4-Jaw Table, (2) Ram Heads, (Right Head Under FAGOR CNC Control), Approx. 30” Under Rail, Table Speeds to 150 RPM, Operator Pendant Control, S/N STO-153/2/2 ST/118/2 LOT 893
| |
DORRIES 68” VBM, 63” 4-Jaw Table, Approx. 30” Under Rail, Ram Head, Table Speeds to 150 RPM, Operator Pendant Controls, S/N B186/50571 LOT 948 | |
BORING MILL ACCESSORIES | 48” x 72” LUCAS Precision Airlift Rotary Table LOT 926 • 30” Diameter PRATT & WHITNEY Motorized Rotary Table LOT 952 • Large Capacity Drilled & Tapped Sub-Tables • (2) 36”D x 33”W x 53-1/2”T Base • (2) 27”D x 33”W x 47-1/2”T Top | |
ANGLE PLATES: T-Slot: (2) 18”D x 12”W x 24”T • 16”D x 23”W x 19”T • 19”D x 36”W x 14”T Drilled, Tapped & Slotted: (2) 20”D x 9”W x 39”T Drilled & Tapped: 28”D x 40”W x 48”T Drilled: (2) 38”D x 12”W x 48”T • 20”D x 18”W x 48”T |
CNC VERTICAL MILL | WELLS-INDEX 3-Axis CNC Mill, 9” x 47” Table, Quick Change Spindle Taper, Spindle Speeds to 4,200 RPM, CNC Controls, S/N 20094 LOT 593 | |
MILLING MACHINES | FREZARKI Vertical Mill, 16” x 79” Table, Power Feed Table & Knee, #50 Taper Spindle Speeds to 1,300 RPM, Pendant Control, S/N 96/71 LOT 754 | |
(2) LAGUN FT2 Vertical Mill, 9” x 48” Power Feed Tables, Spindle Speeds Variable to 4,200 RPM, R-8 Taper, 2-Axis DRO, S/N 11269 LOT 208 & SF-8624 (with Riser) LOT 734 | |
KONDIA Powermill Vertical Mill, 9” x 42” Power Feed Table, Spindle Speeds to 3,000 RPM, R-8 Taper, 2-Axis DRO, S/N 1-771 LOT 207 | |
(3) SHARP First Vertical Mill, 9” x 42” Tables, Spindle Speeds to 2,760 RPM, R-8 Tapers, 2-Axis DRO, S/N 7151659 LOT 206, 7161741 LOT 199 & 7151658 LOT 200 | |
ENSHU Vertical Mill, 10” x 51” Table, 3-Way Power Feeds, #50 Taper Spindle Speeds to 1,503 RPM |
|
MILLPORT Model 2 Vertical Mill, 9” x 42” Table, R-8 Taper, Spindle Speeds to 5,440 RPM, S/N 792354 |
|
ENSHU Universal Vertical / Horizontal Mill, #50 Taper Spindles, (2) Arbor Supports, Universal Vertical Head Attachment, 13” x 68” Table, 3-Way Power Feeds, Spindles Speed to 1,510 RPM, Pendant Control, S/N 20861 |
|
HELIX Indexable Drive Attachment with 8” Chuck & Change Gears DAREX Model E-85/90 End Mill Sharpener w/Collets, S/N 92484 |
ENGINE LATHES | TOS 25”/35” x 125” Gap Bed Engine Lathe, Model SN63C, 4-Way Rapid Traverse, 12” to 28” Chucks, Taper Attachment, Inch / Metric Threading, 3-1/8” Bore, Spindle Speeds to 1,000 RPM, Chip Guard & Pan, S/N 076330950024 LOT 762 | |
MAZAK 21” x 60” Gap Bed Engine Lathe, 29” Swing in Gap, 15” 4-Jaw Chuck, 3-1/8” Spindle Bore, Inch / Metric Threading, Spindle Speeds to 1,500 RPM, S/N 30368 LOT 215 | |
STANDARD MODERN 18” x 60” Engine Lathe, Series 4000, 15” 3-Jaw Chuck, 40-1,600 RPM, 3” Thru-Hole, Threading, Taper Attachment, Chip Guard, S/N 5757 LOT 217 | |
MAZAK 18” x 34” Gap Bed Engine Lathe, 27” Swing in Gap, Model 860, 12” 3 & 6-Jaw Chucks, 3-1/8” Spindle Bore, Inch / Metric Threading, Spindle Speeds to 1,500 RPM, S/N 33639 LOT 216 | |
HOWA SANGYO 17” x 36” Toolroom Engine Lathe, Model 1000, 10" 4-Jaw Chuck, Inch / Metric Threading, Thread Dial, Spindle Speeds to 1500 RPM, S/N 10205 LOT 218 | |
YAMAZEN Maxturn 14” x 32” Toolroom Lathe, 8” 3-Jaw Chuck, Inch / Metric Threading, Thread Dial, Spindle Speeds to 1,800 RPM, S/N BJU7004914 LOT 219 | |
PRECISION LATHES | HARDINGE HLV-H 11" x 16" Precision Tool Room Lathe, Threading, 5C Collet Closer, Vari-Speed Carriage, Variable Spindle Speeds, 6” 3 & 6-Jaw Chucks, S/N HLV-H-10810 LOT 222 | |
TSUGAMI 8" Precision Turret Lathe, 5C Collet Closer, 8-Position Turret, Variable Carriage & Spindle Speeds, Cut-Off LOT 221 | |
HARDINGE HSL High Speed Cut-Off Lathe, 5C Collet Closer & Cross-Slide, S/N HSL5C-1659T LOT 664 | |
automatic barfeed turret lathe | MIYANO 4BC-D 200 Automatic Barfeed Turret Lathe, 2” Round Collet Capacity, 2-5/32” Hole Thru Spindle, 7-1/4” Swing Over Cross Slides, 6-Position End Working Turret, (2) Turning & Cut-Off Slides, Coolant, Bar Feed Enclosure & Controls, S/N 0198BC LOT 665 | |
grinders | KBC SUPER TEC 13” x 29” Universal Cylindrical Grinder, Model LF-800G, w/Swing Down Internal Grinding Attachment, Motorized Workhead Speeds to 310 RPM, Wheel Head to 2,100 RPM, Tailstock, Coolant & Controls, S/N 7854 LOT 283 | |
KBC SUPER TEC 7-1/2” x 8” Cylindrical Grinder, Model CQ-412, w/Motorized Workhead, 6” 6-Jaw Chuck, Tailstock, Coolant, Universal Table, S/N 1186 LOT 297 | |
KBC SUPER TEC 16” x 32” Hydraulic Surface Grinder, Model STP-30A, w/Over Wheel Dresser, Coolant, 16” x 32” Electro-Magnetic Chuck, S/N 7079 LOT 300
| |
CHEVALIER 10” x 20” Hydraulic Surface Grinder, Model FSG-1020AD, w/Overwheel Dresser, Coolant, 10” x 20” Electro Magnetic Chuck, Controls, S/N 25007 |
|
ELLIOTT 8” x 20” Hydraulic Surface Grinder, Model 921, w/Walker 8” x 20” Permanent Magnetic Chuck, Coolant, S/N 109937-2656 |
|
CHEVALIER 6” x 12” Hand Feed Surface Grinder, Model FSG-612, w/Permanent Magnetic Chuck, Controls, S/N 01-02039 |
|
CINCINNATI Monoset Tool & Cutter Grinder, 5” x 36” T-Slot Table & Attachments, S/N 1D2T1V-54 |
|
saws | DO-ALL 13” x 21” Automatic Horizontal Band Saw, 24” Stroke Auto Index, Hydraulic Vises & Discharge Table LOT 753 | |
DO-ALL 15" Vertical Band Saw, Auto Feed, Model U-1421, Variable Blade Speeds, Frame Tilts to 45°, Coolant & Chip Pans, S/N 375-80218 LOT 740 | |
KALAMAZOO STARTRITE 24" Vertical Band Saw, Model 24-T-10 19” x 19” Tilt Table, S/N 44805 LOT 318 |
|
HITACHI Model H-16 Abrasive Cut-Off Saw, Vise & Steel Workbench |
|
hones | SUNNEN CV-616 Cylinder King Hone, Trunnion Table, Dwell Numbers Selector, Assortment of Hone Tooling, S/N 2297 |
|
(2) SUNNEN MBB-1660 & LBA666 Hones, Coolant, AG300 Precision Gage, S/N 80780 & 68463 |
|
Large Assortment of Hone Mandrels, Stones, (2) “WINONA” In-the-Block Crankshaft Grinders, Etc. |
|
welding | MILLER XMT Welder 304 CC/CV 300 AMP Power Supply, S/N LJ430362A w/MILLER 22A Wire Feeder, S/N LJ410136U |
2008 KOIKE ARONSON 48" x 48" 10,000-lb. Capacity Tilting Power Welding Positioner, Model HD100VF, S/N 45610 |
|
HOBART CT300 Cyber-Tig TIG Welder, 120 Series 300-AMP w/Foot Control, S/N 12RT-30241 |
|
LINCOLN TM-400 Idealarc Stick Welder |
|
BUG-O MPD-1000 Modular Drive Programmable Shape Machine w/Weaver, MDS-1005 Controller, S/N 00100060017PB91 |
|
inspections | CORDAX 1808 MEA CMM, Model 1808 MEA, 29” x 54” Granite Table, Renishaw PH8 Probe, Travels: 29.5” X-Axis, 24.6” Y-Axis, 19.7” Z-Axis, Computer, Software & Printer, S/N C-5325 |
|
WILSON 3JR8RB Rockwell Hardness Tester, S/N 11683 SERVICE DIAMOND ROCKWELL & NEWAGE Hardness Testers |
|
KING Portable Brinells Tester TAFT PEIRCE 48” Bench Centers
|
|
EXCELLO 14” Optical Comparator, Model 14-810, S/N 8100573 10” Bench Top Optical Comparator TRU-STONE 36” x 72” Granite Surface Plate, Grade A, S/N 6722 GSE Model 675 Precision Counting Scale |
|
MITUTOYO 12”-36” Micrometers w/ 0’-12” Sets, Intra, I.D., Blade, Threaded, Dial & Digital Micrometers • 8” x 12” Sine Plate, 10” Sine Bar & Others • Lots of Assorted Gauges Including: Thread, Plug, Pitch, Ring, Go / No-Go, Height, Bore, Cadillac w/Riser, Depth • Granite Step Blocks & Parallels, Gauge Block & Pin Sets • Cylindrical Squares, Several Vernier Calipers Including 60" & 80", Dial & Digital Calipers, Squares |
|
forklift & material handling | 2006 YALE 12,000-lb. Forklift, Model GLC120, S/N D818V02764D, LPG, Solid Tires, 3-Stage Mast, 208" Lift Height, 4-Way Valve, 48" Forks | |
2007 HYSTER 8,000-lb. Forklift, Model S80FT, S/N G004V02497E, LPG, Solid Tires, 3-Stage Mast, 195" Lift Height, 4-Way Valve, 48" Forks | |
2001 TOYOTA 6,500-lb. Forklift Truck, Model 7FGCU32, S/N 6217, LPG, Solid Tires, 3-Stage Mast, 187" Lift Height, Sideshift, 44" Forks
| |
YALE 6,000-lb. Forklift, Model G51C.060.CBN.T083, Solid Tires, 3-Stage Mast, Lifting Chains, Lifting Straps, Lifting Cables & Hooks, S/N AK149352 |
|
Pallet Jacks, 2-Wheel Dollies, Die Lift Cart, Carts, Drum Dolly, Tooling Carts |
|
miscellaneous | (2) SPEEDAIRE 10-HP Reciprocating Air Compressor, S/N D003915 SPEEDAIRE 5-HP Reciprocating Air Compressor SPEEDAIRE Model 1LYN7 Air Dryer, S/N MMH0228455 TORIT DONALDSON Dust Collector DAYTON 2-Stage Dust Collector with Portable 55 Gallon Drum TRINCO 35BP 2-Glove Dry Blast Cabinet, Window, Dust Collector, S/N 11144-6 |
|
CLAUSING 4-Stand 7-1/4" Production Drill, Series 16SC, 56” Long Table, S/N 101854-101857 ORBIT 7" Bench Drill Press, Model 1412, 12” Diameter Table ELECTRO-ARC 2DB Metal Tap Disintegrator, 18” x 26” Table, Universal Head & Controls, S/N 8164 10-Ton H-Frame Press, w/Elec-Draulic Control, Adjustable Rail, 39” Between Uprights |
|
CENTRAL HYDRAULICS 12-Ton Pipe Bender w/Attachments HAMMOND KALAMAZOO 12A 12” Double End Pedestal Grinder w/Guards & Tool Rests, S/N 5817 BALDOR, DELTA & CENTRAL MACHINERY Double End Pedestal & Bench Grinders (4) CENTRAL MACHINERY 6" Belt/9" Disc & 4” Belt / 8” Disc Sanders Other Misc. Double End Grinders & Belt Sanders
|
|
(10) VIDMAR & LISTA Tool Cabinets to 13-Drawer, YUASA 8” Super Spacer, Large Quantity of CAT 50, CAT 45, BT 50 & NMTB 50 Tool Holders, (5) WOHLHAUPTER Boring Heads, New & Used Tooling Including Drill Bits, End Mills, Reamers, Spade Drills, Carbide Inserts, Slitting Saws, Sanding Pads, Sanding Wheels, Deburring Tools, Cutoff Tooling, Lathe Tooling, Boring Bars, Shell Mills, Collets, DEWALT & MILWAUKEE Electric Drills, PORTER CABLE Belt Sander, BLACK & DECKER Angle & Straight Grinders, Pneumatic Impact Wrench, Pneumatic Drill Grinders, Mag Base Drill, DEWALT Mitre Saw, Assorted Wrenches, Socket Sets, C-Clamps, Dead Blow Hammers, Ladders & and many other Shop Hand Tools
1” x 2” x 3” Block, V Blocks, Step Blocks, 2” x 4” x 6” Block, V Blocks, 4” x 6” x 8” Block,
(9) Granite & Steel Surface Plates: 30" x 60", 24” x 36”, 18” x 24”, (2) BRIDGEPORT Right Angle Heads, 5C Collet Closer, Collets: R8, 5C, 2J, (2) YUASA & Other 8” 3-Jaw Dividing Heads, (10) KURT 8” & 6" Machine Vises, (21) 6" & 4” Machine & Bench Vises, (5) ALORIS CXA & DA Tool Post, Several 12” Rotary Tables, 24” x 24” Lapping Plate, 10” x 10” Cross Sliding Table, Blacksmith's Anvil |
|
|
|