Asset Reduction
Webcast - Online Only Auction.
Webcast auctions are live online broadcasts of an auction. Auctioneers call the auction from a remote site - not at the location of the auction lots. There is no on-site bidding. Bidders must pre-register for the auction and log in to bid at the auction start time.
CNC Horizontal Machining Centers:
-
(2014) TSUGAMI S206 6-Axis CNC Swiss Turning Center, 20mm Bar/Turning Capacity, 210mm Turning Length, Spindle Speeds to 10,000 RPM (Main/Back), Live Tooling, Y-Axis, Tri-Mist System, Chip Conveyor, FANUC 32i-MB CNC Control, EDGE MINUTEMAN 320SE Magazine Barfeed, sn:23210B, Hours: Power On Time 23467:46/ Cycle Start Time 7914:27;52/ Feed Cutting Time 5369:4:17
(2020) TOYODA FH500J 4-Axis CNC Horizontal Machining Center with (2) 19.68” x 19.68” Pallets, .001 Deg. Rotation, #40 Spindle Speeds to Approx. 15,000 ROM, Approx. 28.7” X-Axis Travel, 28.7” Y-Axis, 33.4” Z-Axis, 60-Position ATC, through spindle Coolant, no Probing, Chip Conveyor, Fanuc 31i CNC Control, sn:NS-5754, Hours: Power On Time 10,953:23 / Run Time 1963:52:8/ Feed Cutting Time 1348:28:0
(2016) OKK HMC400 4-Axis CNC Horizontal Machining Center with Integrated FANUC ROBO M-710iC 6-Axis Robotic Load/Offloading System, (2) 17.7” x 17.7” Pallets, .001 Deg. Rotation, Hydraulic Fixture Coupling, BIG PLUS #40 Spindle Speeds to Approx. 15,000 RPM, Approx. 22” X-Axis Travel, 22” Y-Axis, 27” Z-Axis, 60 Position ATC, TSC, Tool Breakage Detection, Chip Conveyor, FANUC 31iB CNC Control, sn:1063, Hours: Power On Time 27,100:56 / Run Time 18068:45:12/ Feed Cutting Time 8352:41:23
(2009) HAAS EC-400PP 4-Axis CNC Horizontal Machining Center, EC400 Pallet Pool System w/ 6 Pallet Positions, HAAS CNC Control, 12,000 RPM, Inline Direct Drive Spindle, 70 Pocket SMTC, Through Spindle Coolant, sn:2053033, Hours: Power On Time 23085:11/ Cycle Start Time 4420:46:27/ Feed Cutting Time 22389:05
(2004) HAAS EC-400-4AX 4-Axis CNC Horizontal Machining Center, Chip Conveyor, HAAS CNC Control with RPG, sn:51384, Pallet Changer, 12,000 RPM, TSC Through Spindle Coolant, 60 Pocket SMTC, Inline Direct Drive Spindle
(1998) HAAS VF-3 4-Axis CNC Vertical Machining Center with 48” x 18” Table, #40 Spindle Speeds to Approx. 8,000 RPM, 20 Position ATC, Wired for 4th-Axis, sn:15275, Hours: Power On Time / Run Time 812:09:44/ Feed Cutting Time 2446:39:53
(2012) DOOSAN DNM 500 CNC Vertical Machining Center with 40” x 1” Table, #40 Spindle Speeds to 12000 RPM, 30 Position ATC, Through spindle Coolant, no Probe, Fanuc i Series CNC Control with RPG, sn:MV0010-001281, Hours: Power On Time 27,606:8 / Run Time 812:09:44/ Feed Cutting Time 2446:39:53
(2012) HAAS DS-30SSY Dual Spindle CNC Turning Center with Y-Axis Milling, Main & Programmable Sub-Spindle, 18” Turning Diameter x 23” Turning Length, Parts Catcher, Halogen Lighting, Belt Conveyor, Chip Conveyor, HAAS SERVO BAR Magazine Barfeed, HAAS CNC Control, sn:3093197, Hours: Power On Time 744:18:45/ Cycle Start Time 2258:42:12/ Feed Cutting Time 1232:06:32Torit DMC-MMA Mist Collection System
Register 24 hours prior to start of auction.
First-time registrants - in order to bid
for this auction, you MUST HAVE
1) a deposit, 25% of expected purchases or
$1,000 minimum, OR
2) a BANK LETTER of GUARANTEE.
Deposit can be made by either:
- wire transfer (for wire instructions,
call our office 513/738-3311 OR
or email rachel@MyronBowling.com),
- ACH link=ACH Authorization OR
- mail a check payable to
Myron Bowling Auctioneers, Inc.
PO Box 369, Ross, OH 45061
TERMS OF SALE
RIGGING:
Knight Industrial Services
Brian Knight
(502) 649-8835
brian.knight@knightindrig.com
TRUCKING:
Frontline Logistics
Matthew Churchman
734- 449-9474
Mchurchman@frontlinelogisstics.com
Redline
Matthew DellaRiva
216- 990- 4771
Matthew@shipredline.com
Balz
Katy Radomski
570- 212-9556
Sales@balzinc.com
Motus Trucking
Ryan Kauffman
Office (859) 905-2583 ext. 29
teamkauffman@motustrucking.com
HOLDER:
DoubleStar Corp.
1805 Fortune Drive
Winchester, KY 40391
ADDITIONAL INSURED:
Myron Bowling Auctioneers, Inc.
RE: 1805 Fortune Drive
Winchester, KY 40391
AMOUNTS:
General Liability - $1,000,000 each occurrence
$2,000,000 General Aggregate
Business Auto - $1,000,000 Combined Single Limit
Last day for removal is Friday, 8/22/2025.
RIGGING AND REMOVAL IS THE RESPONSIBILITY OF THE BUYER.
Anyone, either a buyer or rigger, who uses a powered vehicle to remove anything from the auction site, will need a certificate of insurance.
Sales tax rate is 6%. We will charge local sales tax unless you have your tax exempt number with you or have it faxed to our office. Our fax number is (513) 738-0221.
Kentucky Sales Tax Exemption Forms
