reenergy logo

Power Generation, Yellow Iron, and Aggregate Handling

ReEnergy Power Plant

Tuesday,
May 7, 2024
9AM ET

4515 Euphrates River Valley Road
Fort Drum, NY 13602

Facility Closing

Featuring:  Control panels • Motor control centers (MCCs) • Electrical drives • (3) 1875 kva diesel AC generators • (2) Kalmar Ottawa 4x2 Spotter Trucks • Dresser Rand 61Mw turbine generator • Heat exchangers • Cooling towers • boilers • Gould water pumps • Caterpillar D8T & D8R dozers • Deere 850C dozer • Komatsu D155AX-6 dozer • Caterpillar 966K loader • Caterpillar IT28B loader • EMD switching locomotive • trucks • trailers • forklifts • welders • toolroom • motors • pumps • spares • monitoring equipment •

If you need additional information on equipment at this auction, contact Greg Hengehold at Greg@MyronBowling.com or (513) 520-7636.

Photos

Register - BidSpotter 

Register - Proxibid
Register 24 hours prior to start of auction. 
First-time registrants
- in order to bid
for this auction, you MUST HAVE
1)  a deposit, 25% of expected purchases or
     $1,000 minimum, OR
2)  a BANK LETTER of GUARANTEE

Deposit can be made by either:
- wire transfer (for wire instructions,
  call our office 513/738-3311 OR
  or email rachel@MyronBowling.com),
- ACH link=ACH Authorization OR
- mail a check payable to
  Myron Bowling Auctioneers, Inc.
  PO Box 369, Ross, OH 45061

TERMS OF SALE

RIGGERS:
Trimble Services

Dustin Trimble
dustin.trimble@trimbleservices.com
(315) 591-4952

C.A.S. Rigging
Roland Eastman
roland@casrigging.com
(603) 491-2450

Mr. Grant Contracting
Steve Theisure
Office: (315) 543-2049
Cell: (315) 778-9965

TRUCKING QUOTES:
Motus Trucking
Ryan Kauffman
teamkauffman@motustrucking.com 
Cell: (859) 512-8884 
Office: (859) 905-2584 ext. 29 

HOLDER:  
ReEnergy Power Plant
4515 Euphrates River Valley Road
Fort Drum, NY 13602

ADDITIONAL INSURED: 
Myron Bowling Auctioneers, Inc.
 RE: 4515 Euphrates River Valley Road
Fort Drum, NY 13602

AMOUNTS: 
General Liability - $1,000,000 each occurrence 
$2,000,000 General Aggregate 
Business Auto - $1,000,000 Combined Single Limit

Removal begins the next morning and on all weekdays from 8AM to 5PM.
Last day for removal is Friday, 5/31/2024.
RIGGING AND  REMOVAL IS THE RESPONSIBILITY OF THE BUYER.
Anyone, either a buyer or rigger, who uses a powered vehicle to remove anything from the auction site, will need a certificate of insurance. 

Sales tax rate is 8%. We will charge local sales tax unless you have your tax exempt number with you or have it faxed to our office. Our fax number is (513) 738-0221.
       New York Sales Tax Exemption Forms

 


Aaron Industrial Solutions

 

FilterSense Specs

Milwaukee Magnetic Base HD Drill Press, 5/8” Chuck

Nuline 1” Drive 6’ Ratchet

Snap-On 1” Drive 1,000 FT. LB. Torque Wrench

Snap-On 3/4” Drive 600 FT. LB. Torque Wrench

Snap-On 3/4” Drive 600 FT. LB. Torque Wrench

Armstrong 3/4” Drive 400 FT. LB. Torque Wrench

Proto 1/2” Drive 250 FT. LB. Torque Wrench

Sunex 3/8” Drive 80 FT. LB. Torque Wrench

Olneda 1/4” Drive 200 IN. LB. Torque Wrench

Armstrong 1” Drive Ratchet, Armstrong 1” Drive Breaker Bar, & (2) 3/4” Drive Ratchets

Assorted Wrench Set, 2-7/8”, 2-5/8”, & 2-3/8”

Assorted Wrench Set, 2-1/4”, 2-3/16”, 2-1/8”, & 2”

Assorted Wrench Set, 2-1/2”, 2”, 1-13/16”, & 1-3/4”

Assorted Wrench Set, 2-1/16”, 1-7/8”, 1-13/16”, & 1-3/4”

Assorted Wrench Set, 1-3/4”, 1-5/8”, 1-11/16”, & 1-1/2”

Assorted Wrench Set, 1-3/4”, 1-11/16”, 1-7/16”, & 1-3/8”

Assorted Wrench Set, 1-11/16”, 1-7/16”, 1-3/8”, & 1-1/4”

Assorted Wrench Set, 1-11/16”, 1”, 15/16”, & 13/16”

(3) Ridgid Pipe Wrenches; (2) 36” & (1) 18”

Box of Assorted Wrenches

Universal-Tool Chipping Hammer, 90 PSI

Universal-Tool Chipping Hammer, 90 PSI

Universal-Tool Chipping Hammer, 90 PSI

Universal-Tool Chipping Hammer, 90 PSI

Assorted Hammer Drill Bits & Spade Bit, 1” Shaft

Welding Table, 49” x 97”, w/ Williams 6” Bench Vise

Ridgid 5” Pipe Vise

V Blocks, 7”

Chicago Pneumatics 1” Drive Impact Wrench

Chicago Pneumatics 3/4” Drive Impact Wrench

Dayton 3/4” Drive Impact Wrench

Dayton 3/4” Drive Impact Wrench

Chicago Pneumatics 3/4” Drive Impact Wrench

(4) 1-1/2” Drive Impact Sockets, 3-1/2”, 3-3/4”, 3-5/16”, & 2-3/8”

(6) 1” Drive Impact Sockets, 4”, 3-7/8”, 3-3/16”, 3-1/16”, 2-7/8”, & 2-7/8”

(4) 3/4” Drive Impact Sockets, 2-13/16”, 2-15/16”, 2-5/8”, & 2-9/16”

Assorted 1” Drive Impact Sockets

Assorted Extensions & Reducers

Assorted 3/4” Drive Impact Sockets

Assorted 3/4” Drive Sockets

Assorted 1/2” Drive Impact Sockets

Assorted 1” Drive Impact Sockets

Assorted 1” Drive Impact Sockets

Assorted 3/8” Drive Impact Sockets

Assorted 1/2” Drive Sockets

Assorted 3/8” Drive Sockets

Set of 3/4” Drive Impact Sockets

1” Drive Socket Set, 3-1/8” - 1-5/8”

DeWalt 025500 9/16” Hammer Drive

Hilti TE5G Hammer Drill

Assorted Hammer Drill Bits

DeWalt DW 293 1/2” Drill

Milwaukee 1/2” Drill

Assorted Pneumatic Tools

Assorted Pneumatic Tools

Assorted Core Drill Bits

Welding Wable, 97” x 24”

Welding Table, 25” x 96-1/2”, w/ Wilton 6” Bench Vise

Jet Double End 8” Bench Grinder, 120V

Milwaukee Deep Cut Portable Band Saw

Milwaukee Portable Band Saw

Milwaukee Portable Band Saw

DeWalt DWE575 7-1/4” Circular Saw

Ridgid R32021 7-1/4” Circular Saw

Bosch CS10 7-1/4” Circular Saw

Milwaukee Sawzall

Hitachi Sawzall

Metabo 7” Angle Grinder

Hitachi 7” Angle Grinder

(2) Milwaukee Die Grinders

Box of Grinding Shields

Metabo 4-1/2” Angle Grinder

Metabo 4-1/2” Angle Grinder

DeWalt Die Grinder

Black & Decker #8 Nibblers

Milwaukee 3/8” Angle Drill

Makita 18V Cordless Drill & Impact w/ Charger

Makita 18V Cordless Drill & Impact w/ Charger

Milwaukee M18 1/2” Drive Impact & Charger

(2) Milwaukee M18 Hammer Drills & Charger

(3) M18 Chargers & (1) Battery

Makita Jig Saw

Ridgid 535 Pipe Threader & Dies, 1-1/2”, 1-1/4”, 1”, 3/4”, & 1/2”

Ridgid 3” Thread Die

Ridgid 1/8” - 2” Thread Die

Ridgid 2” Thread Die

Ridgid 3/4” Thread Die

Ridgid 1/2” Thread Die

Ridgid 1/8” - 2” Thread Die

Ridgid 1/8” - 2” Thread Die

Ridgid 3/8” Thread Die

Ridgid Pipe Threading Set, Dies from 1-1/2” - 1/4”

Ridgid 700 120V Pipe Threader

(2) Ridgid Tube Cutters, 3/4” - 2” & 1/8” - 1”

Ridgid Pipe Wrenches, 2”, 2-1/2”, & 24”

Ridgid 3/4” Pipe Bender

Ridgid 1/2” Pipe Bender

Ridgid 1/2” Pipe Bender

Ridgid 5/8” Pipe Bender

Assorted Tube Benders & Tube Cutter

Greenlee 744 Slug Splitter Heavy Duty Knockout Punch Set

Greenlee Heavy Duty Slug Splitter Hydraulic Knockout Punch Set

Manual Pipe Sheers, (1) 3” & (2) 1-1/2”

Ace Hanson Tap & Die Set

Pipe Extractors & EZ Outs

Assorted Taps & Tap Wrenches

Assorted Dies & Die Wrenches

Wachs Model SDB 103 Small Diameter Beveler

Safety Box Flange Spreader

Akktol BT607 Hand Nut Riveter & Pop Rivet Gun

Greenlee 1990 Dieless Crimping Tool

Eddytherm Bearing Heater

Assorted Drill Bits

Assorted Wrenches

Assorted Hole Saws

Assorted Screw & Nut Drivers

Assorted Sockets, Ratchets, & T-Handle Allen Drivers

Assorted Pliers & Files

Blue Point Rolling Toolbox & Contents

Blue Point Rolling Toolbox & Contents

Blue Point Rolling Toolbox & Contents

Rolling Toolbox & Contents

Parts Bin & Contents of Electric & Hardware

Bolt Bin & Contents

Bolt Bin & Contents

Bolt Bin & Contents

(8) Bolt Bins & Contents of Assorted Plumbing, Nipples, Elbows, Unions, & Valves

(3) Sections of Shelving & Contents of Packing, Clamps, & Hardware

Global Flammable Liquid Storage Cabinet, 59” W x 65” T x 34” D, w/ Contents

Sala 350 LB. Cap. Tripod & Salalift II Manual Hoist, Model 8102003

Skid of Assorted Fall Protection

Wilton Horizontal Band Saw, Model 7020, S/N 0304104, 1-1/2 HP, 115/230 V, 20” Throat

(4) Adjustable Height Pipe Stands

Cantilever Rack & Contents of Pipe, Angle Iron, & Tube Steel w/ Rack of Pipe & Allthread

(3) Louisville Ladders; (2) 6’ & (1) 4’

Jet Geared Head Engine Lathe, Model 1768PHG, S/N P7705-042, 7.5 HP, 3PH, 220/440 V, 17” Swing, 68” Centers, w/ Steady Rest, & Extra Chuck

Jet JRD-750 Radial Arm Drill, 3PH, 220/440 V, S/N 881171, 30” x 20” Table

Enerpac 25-Ton Shop Press

Wilton Belt & Disk Sander, 6” Belt, 12” Disk, Model 4204, S/N 27926

Bio-Circle Parts Washer, Model 10-200, S/N 101964

Lincoln Precision Tig 185 w/ Invertec V250-S

Henkel Rod Oven, Model K458, 120/240 V

(2) Dryrod Rod Ovens, Stand, & Contents, Type 300, 120 V

Assorted Welding Rod

Assorted Welding Wire

Welding Lead & Gouge Torches

Torch Hoses & Regulators

Tig Guns

Chipping hammers, C-Clamps, & Welding Clamps

(5) Boxes & Spool of Welding Wire

Hypertherm Powermax 1250 G3 Series Plasma Cutter, S/N 1250-009793

Thermal Arc Pak SXT Plasma Cutter, 230/460 V, 3PH

Welding Smoke Collector

Weldin Leads & Oxygen Hose

Shelf & Contents

Justrite Flammable Liquid Storage Cabinet & Contents, 43” W x 65” T x 18” D

2-Door Cabinet & Contents of Drill Bits & Regulators

Lovejoy 14.8 HP Drive Motor, Model CHHS-6145Y-21, Input: 1750 RPM

10’ Jib Arm w/ 1-Ton CM Chain Hoist

Transcat D/P Tester, Model 661-D/C140 2, S/N AN02198, 115 V

Utility Relay Company AC Pro Secondary Injection Test Set, Model B-291

Variac Technipower W10MT3A Auto Transformer

Fluke 8842A Multimeter

Tektronix 2220 60 MHZ Digital Storage Oscilloscope

Tif 5500 Halogen Leak Detector

Philips PM 5192 Programmable Synthesizer / Function Generator

GR1433-T Decade Resister Generator Radio

SPX 6673 Belt Tension Gage

F.W. Bell Current Probe, Model UM-1000

SPM ELS-12 Electric Stethoscope

GE DM5E Series Sensing & Inspection Ultrasonic Thickness Gauge

Megger MIT420 Insulation Tester

Brandy BMP 21-Plus Label Printer

Fluke 381 Remote Display TRMS Clamp Meter

Hart 475 Field Communicator

Fluke 867B Graphical Multimeter

Fluke 789 Process Meter

Belt Hog Alignment System

Fluke 741B Documenting Process Calibration

Transmation QuikCal 195

Transmation QuikCal 190

Fixturlaser, Part No. 1-0807

OPTALIGN Plus, Model ALI5.200, S/N 4300 3946

Flir Systems Thermal Cam, P/N 1196827

IRD Vibration Meter

Krautkramer Branson DME, S/N 01NBXN

Yokogawa Oxygen Kit

Hart Communicator, Model 275, S/N 65437

Cen-Tech 66632 Photo Tachometer

5PWF8 Digital Refrigerant Scale, 110 LB. Cap.

Ametek Calibration Instruments, IPI JOFA

Ametek Calibration Instruments, CTC-650A, S/N 534933-00596

Transcat PH Calibration Kit

KNF Pump, 60 PSIG

Clampseal Globe Valves Valve Lapping Kit

Clampseal Globe Valves Valve Lapping Kit

Clampseal Globe Valves Valve Lapping Kit

Clampseal Globe Valves Valve Lapping Kit

Clampseal Globe Valves Valve Lapping Kit

Clampseal Globe Valves Valve Lapping Kit

Pittsburgh Freon Gauges

(5) Butcher Block Tables; (4) are 36” x 72”, (1) is 30” x 72”, (2) Stools, & (3) File Cabinets

(9) Boxes of Assorted Size Shims

Radio Shack Digital Soldering Station

Fluke Intellitone Pro 200 Toner

RobinAir RG3 Refrigerant Recovery Unit

Dremel Flexible Polisher Grinder, Model 732

(4) Chuan Brand Outside Micrometers; 8”-9”, 9”-10”, 10”-11”, 11”-12”

NSK Outside Micrometers, 0-1”, 1”-2”, 2”-3”, & 3”-4”, Set 2 1”-2”, 2”-3”, 3”-4”, & 7”-8”

Mitutoyo 6” Caliper & Mitutoyo Inside Micrometer Set

Starrett Outside Micrometer, 5”-6”, & Aerospace Outside Micrometer, 4”-5”

Assorted Inspection Equipment

Leeb Hardness Tester, Model LM 100

Marksman II Series Ultrasonic Diagnostic Tool, S/N 1911125

Proto Torque Wrench Calibrations Unit & Power Stamp Set

Bronze Tube Test Gauge

(3) Gauges; (1) 400 PSI & (2) 600 PSI

(4) Ashcroft Gauges; 15 PSI, 600 PSI, 1500 PSI, & 2000 PSI

(4) Accudrive Gauges; (3) 3000 PSI & (1) 12,000 PSI

(3) Gauges; 400 PSI, 1000 PSI, & 2000 PSI

BBC Brown BoverI Micro Power Shield Test Set, Type 606

BBC Brown BoverI Micro Power Shield Test Set, Type 606

Dresser Tool Kit 84000 RK for Valve Type 2-4000-4100-4200 & Dresser Tool Kit 64000 RKI for Valve Type 1-1/4”, 1-1/2”, 2-4000 Check Valve Installation Tool

Dresser Tool Kit 94000 RKI Valve Type 2-1/2”-4000, Dresser Tool Kit 54000 RKI Valve Type 1-4000-4100, & Dresser 4000 Series Valve Installation Tool

Smart Trend Meter TPI 9080, CE Temperature & (2) Humidity Meters, & Extech 407730 Sound Level Meter

Dial Gauge Magnetic Base

Max 5 Efficiency Monitor

Magnaflux Blackray B-100A

EFCC Valve Grinding Lapping Machine

Henry Vogt Machine Co. Valve Repair Kit & DME Krautkramer, S/N 104559

Fluke 2190A Digital Thermometer

Caterpillar D8T Dozer, Pin No. CAT00D8TVFMC00357, 25,325 Hours, 27-1/2” Track Pads, 17’ 3” Wide Blade

Caterpillar D8R Dozer, Pin No. 6YZ00526, 27,721 Hours, 3406E Engine, S/N BET00698, 24” Wide Track Pads, Ripper Attachment, 17’ 7” Wide Blade

Komatsu 155AX Dozer, 26” Wide Track Pads, 17’ 9” Wide Blade (Needs Repairs)

John Deere 850C Dozer, 24” Wide Track Pads, 10’ 5” Wide Blade, 7,992 Hours

EMD SW9 Switching Locomotive, 26NL Brake System, 12-Cylinder (V12), 1200 HP, Built Between 1951 & 1953, Maintenance Performed by Peaker Services, Inc. Brighton, Michigan

Caterpillar 966K Wheel Loader, Pin No. CAT0966KPTFS00295

Volvo L120C Wheel Loader, Pin No. L120CV61861, 47,154 Hours, w/ Street Sweeper Attachment

Caterpillar IT28B, Pin No. 1HG00756, 16733, (Needs Repairs, No Bucket)

Loader Bucket, 93” Wide

Loader Jib Attachment

Forkable Magnet, 72”

48” Loader Forks

Plow Blade for Wheel Loader, 11’

Volvo Tandem Axle Tractor, Model VOLVO VE D12-348 180, Vin 4VGJDAGF1VN857227

Fruehauf Tandem Axle Tanker Trailer

2007 Dodge 3500 HD Stake Bed Plow Truck, 5.7 Liter Hemi Engine, Storm Guard Plow, 65,753 Miles, Vin 3D6WH48D07G796556

SaltDogg by Buyers Salt Spreader, 50” Wide, 86” Long

New Holland L225 Skid Steer Loader Super Boom w/ Forks & Bucket, 2,017 Hours

2012 Caterpillar 259B3 Compact Track Loader Skid Steer w/ rubber tracks, 4,596 hours, PIN CAT0259BJYYZ04361

Clark CGP408,000 LB. Cap. Forklift, 3-Stage Mast, Sideshift, 48” Forks, 188” Lift Height, 2,360 Hours, LP Gas, Pneumatic Tires

Komatsu 6,000 LB. Forklift, Model FD30VT11, 3-Stage Mast, Sideshift, 42” Forks, Diesel Engine, Pneumatic Tires, 150” Lift Height, 4,633 Hours

Clark GPX25 5,000 LB. Forklift, 3-Stage Mast, Sideshift, 48” Forks, Deisel Engine, 3,306 Hours

Clark 6,000 LB. Forklift, 2-Stage Mast, 42” Forks, LP Gas, Pneumatic Tires (Needs Repairs)

Large Assortment of Caterpillar Parts; Alternators, Radiators, Filters, Hydraulic Hoses, Shelving, Pallet Rack, & Cabinet

Hydraulic Hose Crimping Station, Chop Saw, Crimper, & Fittings

Jesco 1.5 Yd. Self-Dumping Hopper

Wright 1/4 Yd. Self-Dumping Hopper

1/2 Yd. Self-Dumping Hopper

1985 LeRoy Somer 1875 KVA Generator, Type PA1006115-70-4P, w/ Mitsubishi 1700 HP Diesel 16-Cylinder, Model S16N-PTA, S/N 10549, 1,809 Hours

1990 LeRoy Somer 1875 KVA Generator, Type PA100G115-70-P4, w/ Mitsubishi 16-Cylinder Diesel, Model S16N-MPTK, S/N 10862, 1,731 Hours

1997 LeRoy Somer 1875 KVA Generator, Type PA1006115-70-P4, w/ Mitsubishi 1769 HP V 12 Diesel Engine, Model s12R-PTA, S/N 10544, 1,089 Hours

Eaton 2,000-Gal. Diesel Tank, 64” x 12’, w/ Fisher Regulators & Valves

Ingersoll Rand Air Compressor, Model SSR-HP-250, 250 HP, Rotary Screw Type, 150 PSIG Max. Pressure, 460V, S/N D5108V87E, 27,405 Hours

Ingersoll Rand Air Compressor, Model SSR-HP-250, 250 HP, Rotary Screw Type, 150 PSIG Max. Pressure, 460V, S/N 25109V87E, 26,789 Hours

Roy E. Hanson Jr. Mfg. Air Tank, 1,500-Gal.

Roy E. Hanson Jr. Mfg. Air Tank, 1,500-Gal.

Desiccant Air Dryer, Model 450, Type V, 920 SCFM, 125 PSIG

Desiccant Air Dryer, Model 450, Type V, 920 SCFM, 125 PSIG

Coppus Murray Steam Turbine, 1708 HP, 3550 RPM, 160 SQ. IN. Steam Pressure, S/N 5107 (Located on second floor of the plant)

1987 Westinghouse 2000 HP Turbine, 3 PH, 4160 V, 4512 Frame, S/N 460SAA-01, 3578 RPM (Located on second floor of the plant)

Ingersoll Rand HTW Pump, Type Centrifugal, Horizontal End Suction, 2400 GPM, 450 HP, 1800 RPM (Located on second floor of the plant)

Ingersoll Rand HTW Pump, Type Centrifugal, Horizontal End Suction, 2400 GPM, 450 HP, 1800 RPM (Located on second floor of the plant)

Ingersoll Rand HTW Pump, Type Centrifugal, Horizontal End Suction, 2400 GPM, 450 HP, 1800 RPM (Located on second floor of the plant)

Bos Hatten/Holtec CF-HTR-120 Pump, Type Horizontal U-Tube, 3100 PST & 450 Deg. F (Located on second floor of the plant)

Bos Hatten/Holtec CF-HTR-120 Pump, Type Horizontal U-Tube, 3100 PST & 450 Deg. F (Located on second floor of the plant)

Plant Heating HTW Heat Exchangers, Type Horizontal U-Tube, 550 PSIG & 450 Deg. F, Flow Rate 220 GPM, Inlet Temp. 360 Deg. F, Discharge Temp. 220 Deg. F (Located on second floor of the plant)

Plant Heating HTW Heat Exchanger, Type Horizontal U-Tube, 550 PSIG & 450 Deg. F, Flow Rate 220 GPM, Inlet Temp. 360 & 220 Deg. F (Located on second floor of the plant)

Nash Kinema Steam Jet Air Ejector, Type Steam Jet, 2-Stage, Flow Rate/ 10 SCFM, Air 45 LB./Hr., Design Pressure 1.0 IN. HG., ABS Steam Flow 670 LB./Hr. at 160 PSIG (Located on second floor of the plant)

Bos-Hatten/Holtec SM-HTR-70 Type Horizontal U-Tube, Tube Side Thermal Temp. Difference 5 Deg. F, Pressure & Temp. 350 PSIG/ 300 Deg. F, Shell Side Sub Cooler Approx. Temp. 10 Deg. F, Pressure & Temp. 120 PSIG/325 Deg. F (Located on second floor of the plant)

Bos-Hatten/Holtec CM-HTR-80 Type Horizontal U-Tube, Tube Side Thermal Temp. Difference 5 Deg. F, Pressure & Temp. 120 PSIG/ 300 Deg. F, Shell Side Sub Cooler Approx. Temp. 10 Deg. F, Pressure & Temp. 120 PSIG/325 Deg. F (Located on second floor of the plant)

Chicago Heater CM-DEA-90 Type Spray Tray, Cap. 553,980 LB./Hr., Operating Pressure 30-65 PSIG, Pressure & Temp. 120 PSIG/ 650 Deg. F (Located on second floor of the plant)

Pump, 4L2, 815 GPM, 30 HP, 1750 RPM, 460V, 286T Motor Frame (Located on second floor of the plant)

Pump, 4L2, 815 GPM, 30 HP, 1750 RPM, 460V, 286T Motor Frame (Located on second floor of the plant)

Dresser Rand 63,700 KW Condensing Steam Turbine w/ Generator, S/N 37885, Inlet Steam Conditions 1496.3 PSIG at 950 Deg. F, TT Exhaust Pressure 1.486” HG ABS, Extraction Pressure 170 PSIG, Turbine Speeds 3780 RPM Max., 3420 RPM Min. 1670 RPM Fist Critical 4000 RPM 2 Critical (Located on second floor of the plant)

Amarillo Gearbox Double Reduction, Model 1712.S, 525 HP Cap., Reduction Ratio 14:1, Slow Speed Shaft Diam. 4.999, Fan Shaft Keyway 1.25” W x 5/8” D, High Speed Bore Diam. 2.936, Input Shaft Keyway 3/4” W x 3/8” D (Located on second floor of the plant)

Assorted Wrenches & Wrench Sets (Located on second floor of the plant)

Assorted Hand Tools (Located on second floor of the plant)

Assorted Sockets & Ratchets (Located on second floor of the plant)

Assorted Hand Tools (Located on second floor of the plant)

(4) Toolboxes & 2-Door Cabinet (Located on second floor of the plant)

Rolling 5-Drawer Toolbox (Located on second floor of the plant)

(4) Pipe Wrenches; 36”, 24”, 18”, & 8” (Located on second floor of the plant)

(4) Pipe Wrenches; 36”, 18”, 14”, & 10” (Located on second floor of the plant)

36” Ridgid Pipe Wrench & 48” Bolt Cutters (Located on second floor of the plant)

Assorted Pry Bars (Located on second floor of the plant)

Assorted Pneumatic Tools & Hammers (Located on second floor of the plant)

Steel Table, 30” x 64” (Located on second floor of the plant)

2012 Clausing Kalamazoo Horizontal Band Saw, Type KC842W, 220 V, 1-PH (Located on second floor of the plant)

Knaack Box, 60” W x 30” D x 47” T (Located on second floor of the plant)

Knaack Box, 60” W x 30” D x 47” T (Located on second floor of the plant)

Knaack Box, 60” W x 30” D x 47” T (Located on second floor of the plant)

Knaack Box, 48” W x 30” D x 30” T (Located on second floor of the plant)

CM Series 622 5-Ton Chain Hoist (Located on second floor of the plant)

Rolling Steel Cart, 41” x 60” (Located on second floor of the plant)

Fall Protection Harnesses (Located on second floor of the plant)

Dayton 5,500 LB. Pallet Jack (Located on second floor of the plant)

Rolling Shop Cart, 30” x 50” (Located on second floor of the plant)

Lincoln Idealarc R3R300 Arc Welder (Located on second floor of the plant)

Schaefer Fan, Model VAF3000A (Located on second floor of the plant)

Ridgid 16-Gal. Shop Vac (Located on second floor of the plant)

Shop Fan, 40” & 36” (Located on second floor of the plant)

2-Wheel Dolly & Drum Dolly (Located on second floor of the plant)

Conveyor, 12” x 18” (Located on second floor of the plant)

Sumner 2-Wheel Cantilever Cart (Located on second floor of the plant)

Beech Breaker Cart, Model 2W-2006, S/N 033744, 300 LB. Cap. (Located on second floor of the plant)

Knaack Box w/ SC Hydraulic Power Unit (Located on second floor of the plant)

Electric Motor w/ Compressor Pump on 2-Wheel Dolly (Located on second floor of the plant)

Air Hose & Blowers (Located on second floor of the plant)

Shelf & Content of Assorted Plumbing (Located on second floor of the plant)

Spreader Bar, 15’ L x 12” T, w/ Slings & Shackles (Located on second floor of the plant)

(10) 2-Door Cabinets (Located on second floor of the plant)

Section of Pallet Rack & Contents, 42” D x 96” L (Located on second floor of the plant)

Flammable Liquid Storage Cabinet, 59” W x 34” D x 65” T, w/ Spill Response Barrel (Located on second floor of the plant)

(8) Sky Climber Hoists, Model 4 (Located on second floor of the plant)

Steel Table, 30” x 65”, w/ 4” Pipe Vise (Located on second floor of the plant)

(4) Spider Sky Climber Hoists & Hardware (Located on second floor of the plant)

(2) 40” Shop Fans, 50” Rolling Ladder, & 6’ Ladder (Located on second floor of the plant)

12’ Extension Ladder & 12’ Walk Board (Located on second floor of the plant)

Gorbel 2-Ton Rolling Gantry, 151 Span, 12’ Tall, w/ 2-Ton P&H Chain Hoist (Located on second floor of the plant)

Gorbel 2-Ton Rolling Gantry, 151 Span, 12’ Tall, w/ 2-Ton P&H Chain Hoist (Located on second floor of the plant)

Gorbel 2-Ton Rolling Gantry, 151 Span, 12’ Tall, w/ 2-Ton P&H Chain Hoist (Located on second floor of the plant)

Gorbel 2-Ton Rolling Gantry, 151 Span, 12’ Tall, w/ 2-Ton P&H Chain Hoist (Located on second floor of the plant)

Gorbel 2-Ton Rolling Gantry, 151 Span, 12’ Tall, w/ 2-Ton P&H Chain Hoist (Located on second floor of the plant)

Gorbel 2-Ton Rolling Gantry, 151 Span, 12’ Tall, w/ 2-Ton P&H Chain Hoist (Located on second floor of the plant)

Louisville 28’ Extension Ladder, 300 LB. Cap., Michigan 8’ Step Ladder, & Tri Arc 60” Rolling Step Ladder (Located on second floor of the plant)

Lincoln Grease Cart & 2-Wheel Dolly (Located on second floor of the plant)

2-Door Cabinet & Contents of Shop Cart w/ (2) Gear Reduction Gearboxes (Located on second floor of the plant)

Lincoln Idealarc R3R-300 DC Arc Welder & Welding Curtain (Located on second floor of the plant)

Wright Self-Dumping Hopper & 40” Shop Fan (Located on second floor of the plant)

Louisville 24’ Extension Ladder (Located on second floor of the plant)

(4) Werner Aluma-Plank Walk Boards, 19” x 84”, & Piece of Scaffold (Located on second floor of the plant)

GE 25 KVA Transformer, 480 V Primary, 120 V Secondary (Located on second floor of the plant)

(2) Werner Step Ladders, 12’ & 6’ (Located on second floor of the plant)

TPI 40” Shop Fan (Located on second floor of the plant)

Continental Blower w/ Leeson 100 HP Motor, 460 V, 3575 RPM, 405TS Frame

PARA-Mount II Vibratory Feeder, Model FRC 2479

PARA-Mount II Vibratory Feeder, Model FRC 2479

PARA-Mount II Vibratory Feeder, Model FRC 2479

Continental Blower w/ 100 HP Motor, 460 V, 3570 RPM, 405TS Frame

Continental Blower w/ Reliance 100 HP Motor, 460 V, 3570 RPM, 405TS Frame

Gardner Denver Multistage Centrifugal Blower w/ Leeson 100 HP, 230/460 V, 3575 RPM, 405TS Frame

Toolbox & Content

Toolbox & Content

Homemade Rolling Toolbox & Blue Point Toolbox

Miller Dialarc 250 AC/DC Constant Current Arc Welding Power Source

Knaack Box, 60” W x 30” D x 48” T

(3) Jescraft Georgia Buggies

(2) Shop Vacs

(3) Ladders; (1) 20’ Extension Ladder, (1) 8’ Step Ladder, (1) 6’ Step Ladder

Shop Cart, 30” x 48” & Wright 1/4 Yd. Self-Dumping Hopper

8’ Rolling Step Ladder

(2) 100” Rolling Step Ladders

Rolling Gantry, 1/2-Ton, 88” Span, 86” Tall

100” Rolling Step Ladder

(2) Self-Dumping Hoppers; 1/2 & 3/4 Yd.

Wright 1 Yd. Self-Dumping Hopper

(2) Saf-T-Cart Torch Carts

(2) Justrite Flammable Liquid Storage Cabinets; 34” W x 34” D x 65” T & 59” W x 34” D x 64” T

Beech 1,000 LB. Cap. Engine Hoist

2-Wheel Dolly & Electrical Wire Cart

Pneumatic & 120 V Hydraulic Pumps Mounted on (2) Dollies

2018 Avery Weigh-Tronix 140,000 LB. Cap. Truck Scales, Digital Indicator, Deck Length: 70’, S/N 160834, Model 465

2012 Avery Weigh-Tronix 120,000 LB. Cap. Truck Scales, Model BMS-SD-7010-100T 465, S/N 12B-73807, 70’, Digital Indicator

Phelps Truck Dumper, Model AX270FB63, 120,000 LB. Cap., 69’ L x 106” W, (2) Phelps Hydraulic Cylinders, Model 7605-500-F-C, Hydraulic Power Unit, Model 2-75-1200-FB, Receiving Hopper, Model C-G-62-12-11.5-6-60, Phelps Back Rake, Model BR-12X16-20-3C

Phelps Truck Dumper, Model AX270FB63, 120,000 LB. Cap., 69’ L x 106” W, (2) Phelps Hydraulic Cylinders, Model 7605-500-F-C, Hydraulic Power Unit, Model 2-75-1200-FB, Receiving Hopper, Model C-G-62-12-11.5-6-60, Phelps Back Rake, Model BR-12X16-20-3C

Eaton Freedom Series 2100 Motor Control Center, 65,000 AMP Rating, 600 Max. Volts, 480 V, 3 PH, 60 (Buyer must disconnect or cut electrical wires and cables at the box)

Eaton Freedom Series 2100 Motor Control Center, 65,000 AMP Rating, 600 Max. Volts, 480 V, 3 PH, 60 Hz (Buyer must disconnect or cut electrical wires and cables at the box)

Eaton Magnum DS Metal Enclosed LV Switchgear, 480/277 Voltage, Item No. 002, DWG No. L002926-F001, 3 PH, 60 Hz, Main Bus 3200, Sect Bus 3200 (Buyer must disconnect or cut electrical wires and cables at the box)

Eaton 9355 UPS Battery Backup System (Buyer must disconnect or cut electrical wires and cables at the box)

(5) ABB ACS 550 Drives, 0.75-132 KW, 1-200 HP (Buyer must disconnect or cut electrical wires and cables at the box)

Eriez Magnet w/ SCS 24” Conveyor, Micro-Tech 2000 Controls, & Eriez Model N4X-40C41 Controls

Eriez Magnetics Model N12/4-10K41 Controls & Magnet

2012 Cooling Tower Depot Inc. Cooling Tower, Model CCF 484832-21-30, Water Circulation 30,800 GPM, Inlet Water Circulation 109.5 Deg., Outlet Water Temp. 86 Deg., Wet Bulb Temp. 74 Deg., Tower Type Counterflow, (2) Cells, Cell Size: 48’ x 48’, Overall Length & Width: 96’ x 48’, Distribution Type Low Pressure Down Spray 361.9 million BTU Per Hour

ABB VFD Model ACS800 Drive Module, Total Current 600 AMPs up tot 250 HP Capacity, 480 V, 3 PH, 60 Hz (Buyer must disconnect or cut electrical wires and cables at the box)

ABB VFD Model ACS800 Drive Module, Total Current 600 AMPs up to 250 HP Capacity, 480 V, 3 PH, 60 Hz (Buyer must disconnect or cut electrical wires and cables at the box)

Eaton Freedom Series 2100 Motor Control Center, 480 V, 3 PH, 4W,60 Hz, 600 Volt Max., Rating 65,000 AMPS (Buyer must disconnect or cut electrical wires and cables at the box)

Eaton Ampgard MV Motor Control, Model EDR3000, 4160 V, 60 Hz, 1200 AMP, w/ (4) Eaton Ampgard Medium Voltage Control Rated Load 350 HP (Buyer must disconnect or cut electrical wires and cables at the box)

Eaton 9355 UPS Battery Backup (Buyer must disconnect or cut electrical wires and cables at the box)

General Electric Vertical Motor, 350 HP, 4000 V, 46 AMP, 1195 RPM, 3 PH, 60 Hz, Type KS, Model K5S511DT7401MMB

General Electric Vertical Motor, 350 HP, 4000 V, 46 AMP, 1195 RPM, 3 PH, 60 Hz, Type KS, Model K5S511DT7401MMB

General Electric Vertical Motor, 350 HP, 4000 V, 46 AMP, 1195 RPM, 3 PH, 60 Hz, Type KS, Model K5S511DT7401MMB

General Electric Vertical Motor, 350 HP, 4000 V, 46 AMP, 1195 RPM, 3 PH, 60 Hz, Type KS, Model K5S511DT7401MMB

Hog & Disc Screen Hog Mfg. West Salem Machinery, Model 4048, BP Screen Mfg. West Salem Machinery, Model 48-12, Disk Screen Assy. w/ Spare Parts

ABB Medium Voltage Conversion Equipment VFD ACS 2000 Drive, Input Voltage 4160 V, Type Code ACS2040-2L-AN1-a-1H+FAMM0+TSM05, 50/60 Hz, Aux. Voltage 480 (Buyer must disconnect or cut electrical wires and cables at the box)

ABB Medium Voltage Conversion Equipment VFD ACS 2000 Drive, Input Voltage 4160 V, Type Code ACS2040-2L-AN1-a-1H+FAMM0+TSM05, 50/60 Hz, Aux. Voltage 480 (Buyer must disconnect or cut electrical wires and cables at the box)

ABB Medium Voltage Conversion Equipment VFD ACS 2000 Drive, Input Voltage 4160 V, Type Code ACS2040-2L-AN1-a-1H+FAMM0+TSM05, 50/60 Hz, Aux. Voltage 480 (Buyer must disconnect or cut electrical wires and cables at the box)

Eaton Freedom Series 2100 Motor Control Center, 65,000 AMP Rating, 600 Volt Max., 480 V, 3PH, 60 Hz (Buyer must disconnect or cut electrical wires and cables at the box)

Trane AC Unit, Model RAUJC504BC03A0DF00000, S/N C13A00350, 460 V, 60 Hz

EKTO Model 888 96” x 96” Portable Building & Contents, Heater Controllers, Model 48i, Co Analyzer, Model 42C Analyzer & Model 43C Analyzer

Toshiba TMEIC 2000 HP Electric Motor, Rated Voltage 4160, 1188 RPM, 60 Hz, Type TIKE-FCKW11, Frame 450-1400

Toshiba TMEIC 2000 HP Electric Motor, Rated Voltage 4160, 1188 RPM, 60 Hz, Type TIKE-FCKW11, Frame 450-1400

Toshiba TMEIC 2000 HP Electric Motor, Rated Voltage 4160, 1188 RPM, 60 Hz, Type TIKE-FCKW11, Frame 450-1400

Roots Rotary Lobe Blower, Model 826 RCS JV, w/ Siemens 125 HP Electric Motor, 4160 V, 60 Hz, 444T Frame, 1780 RPM

Roots Rotary Lobe Blower, Model 826 RCS JV, w/ Siemens 125 HP Electric Motor, 4160 V, 60 Hz, 444T Frame, 1780 RPM

Roots Rotary Lobe Blower, Model 412 RAM-J, w/ 75 HP 460 V Electric Motor

Flammable Liquid Storage Cabinet, 34” W x 34” D x 65” T, File Cabinet, Kennedy Toolbox, (4) Westward Toolboxes

Stearns Conveyor, 46” Approx. 700’

Carbis 40’ Tall Fall Protection Training Center

(8) Concrete Barriers

(6) Jersey Barriers

(7) Jersey Barriers

(22) Concrete Barriers

Shel Lab Oven Sheldon Mfg., Model FX14-2, S/N 04003813, 230 V

Rest of the Contents of Trailer; Ladder, Tools, (3) Desks, (2) Folding Tables, Microwave, Refrigerator, Coffee Pot, Locker, & Chairs

1989 Rader Disc Screen, Jab No. 89-7848

Nordberg Conveyor, 22” x 48’

92) Jesco 1.5 Yd. Dump Hoppers (Needs Repairs)

1/4 Yd. Dump Hopper & Springs Fabrication 100 PSI Tank, Approx. 200-Gal.

1-1/2” - 1/2 Plate Steel Cut Outs

Cantilever Rack & Contents of I-Beams, C-Channel, & Plate Steel

Westinghouse Switch Gear, Type VCP-W, Metal Clad Switch Gear, ID No. 71Y5135, 4.40 Max. KV, Max. Main Bus Amps 1200 (Buyer must disconnect or cut electrical wires and cables at the box)

Eaton Type VCW Switchgear, 06/15 DMF, 60 Hz, 38 KV Max. Voltage, SO 72YC395, (5) Sections (Buyer must disconnect or cut electrical wires and cables at the box)

Eaton Breaker Type 380VCP-W, 38 KV Max. Volts, 60 Hz, Style 3A75099G01 (Buyer must disconnect or cut electrical wires and cables at the box)

Genie Mix-N-Match Platform, Model WH-84IN, S/N 1187-5748, 300 LB. Cap., Platform Height: 6’

Shelf of Assorted Wire & Wire on Floor

(4) Shelves & (1) 2-Door Cabinet of Assorted Electrical Components

(2) Westinghouse Breakers, Westinghouse Vacuum Circuit Breaker, VCP)-W 250, 100-140 DC, Style 3776A11G02

(2) Westinghouse Vacuum Circuit Breakers, Type 50 VCP-W250, 4.76 KV, Volt Range: 100-140DC, Style: 3776A11G02

Reliance 200 HP Electric Motor, 460V, 3-PH, 1735 RPM, 447TS Frame

Reliance Duty Master 10 HP Electric Motor, 230/460 V, 3-PH, 1770 RPM, X286TY Frame

Reliance Duty Master 10 HP Electric Motor, 230/460 V, 3-PH, 1770 RPM, X286TY Frame

Teco Westinghouse 20 HP Electric Motor, 230/460 V, 1760 RPM, 256T Frame

Teco Westinghouse 5 HP Electric Motor, 230/460 V, 1745 RPM, 184TC Frame

Reliance 75 HP Electric Motor, 460 V, 3-PH, 1780 RPM, 365T Frame

Teco Westinghouse 20 HP Electric Motor, 230/460 V, 3-PH, 3525 RPM, 254T Frame

Toshiba 50 HP Electric Motor, 230/460 V, 3-PH, 1775 RPM, 326TC Frame

Nema Weg 55 HP Electric Motor, 460 V, 3-PH, 1775 RPM, 364/5T Frame

Toshiba 60 HP Electric Motor, 460 V, 3-PH, 1775 RPM, 364T Frame

General Electric 150 HP Electric Motor, 460 V, 3-PH, 1780 RPM, L444VP16 Frame

Dodge Hydro Torque-ARM Speed Reducer Gear Box, Size: TXT625T, Part No. 246151 VQ, 25.13 Ratio

Baldor 15 HP Electric Motor, 125 Field Volts, 1750 RPM, 288AT Frame

reliance 100 HP Electric Motor, 460 V, 3-PH, 3570 RPM, 405TS Frame

General Electric 20 HP Electric Motor, 230/460 V, 3-PH, 1775 RPM, 256T Frame

General Electric 40 HP Electric Motor, 230/460 V, 3-PH, 3550 RPM, 286TS Frame

Dodge TXM Gear Reduction Gear Box, 9.075 Ratio, Size: TXM 600

Reliance 40 PH Electric Motor, 460 V, 3-PH, 1765 RPM, 324T Frame

Toshiba 50 HP Electric Motor, 230/460 V, 3-PH, 1775 RPM, 326T Frame

Toshiba 25 HP Electric Motor, 230/460 V, 3-PH, 1770 RPM, 284T Frame

Reliance 230/460 V Electric Motor, Approx. 5 HP (Info N/A)

Dayton 1 HP Electric Motor, 190/330 V, 3-PH, 1155 RPM, 143-5T/56HZ Frame

Baldor .25 HP Electric Motor, 115/230 V, 1-PH, 1725 RPM, 56C Frame

Baldor .25 HP Electric Motor, 115/230 V, 1-PH, 1725 RPM, 56C Frame

Baldor 1/3 HP Electric Motor, 115/208-230 V, 1-PH, 1725 RPM, 48 Frame

Baldor 2 HP Electric Motor, 208-230/460 V, 3-PH, 3450 RPM, 145T Frame

Baldor 1/3 HP Electric Motor, 115/208-230 V, 1-PH, 1725 RPM, 48 Frame

(2) General Electric 1 HP Electric Motors, 180 V DC Motor, 1725 RPM, 56 Frame

(3) Electric Motors; (1) Baldor 1-1/2 HP, 208-230/460 V, 3-PH, 3450 RPM, 56CZ Frame, (1) Baldor 1/3 HP, 115/208-230 V, 1-PH, 1725 RPM, 18 Frame, (1) Reliance .50 HP, 208-230 V, 3-PH, 1725 RPM, FB 56C Frame

AMT 5 HP Electric Motor w/ Pump, 208-230/460 V, 60 Hz, 190/380 V, 50 Hz, 3520/2880 RPM, Model DS32

Baldor 10 HP Electric Motor, 230/460 V, 3-PH, 1760 RPM, 215T Frame

(3) Electric Motors; (1) Leeson Watt Saver 1 HP, 230/460 V, 3-PH, 1170 RPM, 56C Frame, (1) Reliance 1 HP, 200 Field Volts, 1750/2050 RPM, LG0056HC Frame, & (1) General Electric 2 HP, 180 V, 1750/2050 RPM, Encl. TEFC Frame

Worldwide Severe Duty Motor, 15 HP, 60 Hz, 230/460 V, 50 Hz, 200/400 V, 1780/1480 RPM, 254T Frame

Worldwide Severe Duty Motor, 15 HP, 60 Hz, 230/460 V, 50 Hz, 200/400 V, 1780/1480 RPM, 254T Frame

Worldwide Severe Duty Motor, 15 HP, 60 Hz, 230/460 V, 50 Hz, 200/400 V, 1780/1480 RPM, 254T Frame

Toshiba 20 HP Electric Motor, 230/460 V, 3-PH, 1770 RPM, 256T Frame

Toshiba 15 HP Electric Motor, 230/460 V, 3-PH, 1770 RPM, 254T Frame

Section of Pallet Racking & Contents of Dodge & SKF Bearing Block, TRW Pumps, Etc.

(3) Sections of Pallet Rack & Contents of Pumps, Bearing Blocks, & Electric Motors

(4) Assorted Circuit Breakers

Auburn FilterSense Dust Monitoring System, (3) FilterSense Monitors on 1st Floor w/ (21) Filter Sensors on Top of Baghouses on 3rd Floor, Computer Monitor on 2nd Floor 

PMR rotary Feeder, 30” x 30”, Rotor Helix, Right Hand Rotation CCW, S/N 6740

Content of Area Behind Baghouse

Content of Area Behind Baghouse 1

(3) Heat Star HD 125,000 BTU/Hr. Salamander Kerosene Heaters

(3) Propane Salamander Heaters; (1) Master 125,000 BTU, (2) LB White Tradesman 170 Ultra 125,000 BTU

(2) CM 5-Ton Chain Hoists

Husqvarna YTH 22V46 Riding Mower, 22 HP Briggs & Stratton Intek V-Twin Engine, 46” Deck

Ariens Professional 32, 32” W, 23.5 Height, Briggs & Straton 21 HP Engine

M Professional 48” Wide w/ Infrared Burner, Smoke Burner, & (4) Main Burners

2-Wheel Dolly & Bottle Dolley

Dolly Mounted Craftsman Pancake Compressor, 120 V

Westward 24/12 V Battery Charger, Sears 12 V 8/2 AMP Battery Charger

Assorted Extension Cords

Speedway 2-Ton Floor Jack & (2) Jack Stands

Target 12” Quickie Saw & Concrete Cure & Seal Sprayer

Bonny USA Ratchet Wrenches

Greenlee No754 Cable Cutters, Ideal Crimp Tool 83-005, Ridgid 24” Bolt Cutters

(5) Levels; (3) 48” & (2) 24”

3-7/8” Hammer Wrench

Large Lot of Hammer Wrenches, from 3-1/8” - 1-1/4”

Craftsman 16” Electric Chainsaw, Jet 8” Double End Grinder, (2) Wire Tapes, & (2) Clip Ring Removers

(3) Long Reach Wrenches; 1-11/16”, 1-1/2”, & 1-1/4”

(New) Subaru 6 HP Engine

Duro Flow 3006-VT Blower, S/N S5414689, & Roots Rotary Lobe Blower, Model 42V-RAI

Power Team Hydraulic Pump & Assorted Jacks

(5) Assorted Size Bottle Jacks

Porta Power Accessory Kit

Mid State Banding Cart & Banding Tools

ABB ACS 550 Drive, 0.75-160 KW, 1-200 HP

ABB ACS 550 Drive, 0.75-160 KW, 1-200 HP

ABB ACS 550 Drive, 0.75-160 KW, 1-200 HP

ABB ACS 550 Drive, 0.75-160 KW, 1-200 HP

ABB ACS 550 Drive, 0.75-160 KW, 1-200 HP

ACS 880 Drive Motor, Overload Protection

(4) ABB Drives, 3-1.5 HP

(3) ABB Drives, 3-1.5 HP

(3) Shop Carts

(2) AMT Pumps, 3” & 2”, 5 & 2 HP

TS Chan Bearing, Consolidated Valve, Dodge Gear Reduction Box, & Box of Salisbury Highline

(30) Sections of Shelving & Contents of Pulleys, Flanges, Bearing Pillow Blocks, Assorted Plumbing, Office Supplies, & Hand Tools

(2) 12-Drawer Stanley Vidmar Cabinets & Contents of Assorted Air, Electrical, etc.

(12) Sections of Shelving & Metro Shelf & Contents of Assorted Parts, Electrical & Some Plumbing Parts

(13) Sections of Shelving & 2-Door Cabinet w/ Contents of Plumbing, Sensors, Bearings, & Electrical

(14) Sections of Shelving & Contents of Filters, Belts, Plumbing, etc.

(14) Sections of Shelving & Contents of Sprockets, Electrical, & Plumbing

(7) Sections of Pallet Racking, (10) 10’ x 42” Deep Uprights, (46) 96” x 3” Horizontal Beams, & Contents of Conveyor Parts, Plumbing Flanges, Gate Valves, (2) Air Conditioners, Halogen Lights, Grease Guns, Compressor Motor, Floor Sander, & Spill Kit

Skid of Assorted Wheel & Gear Pullers

Contents of (3) Sections of Shelving; Bearings, Plumbing, Hardware, Casters, Hand Tools, & Spill Kit

(2) 2-Door Cabinets, & Contents of Corner, Styrofoam & Gasket Material

(5) 2-Door Cabinets & Contents of Salisbury Ark Flash Helmets & Amp Probes

(5) 2-Door Cabinets & Contents of Plumbing, Electrical, Solder, & Hard Hats

(2) Bunting Magnetics Co. Conveyor Magnets

Approx. (35) Spools of Assorted Wire & Cable

Ingersoll Rand Pneumatic Winch, Approx. 30,000 LB. Cap.

Approx. 1,000-Gal. Trailer Mounted Polly Tank & Honda GX 120 Engine w/ 2” Pump

Remaining Contents of Building; Conveyor Parts, Equipment Parts, Cable Strings, Assorted Plumbing, Electrical Disconnect Boxes, (2) Cabinets, & Tire Chains

Large Lot of Scrap; Pipe, I-Beams, Catwalk Grate, & Small Silo

Large Lot of Scrap; Conveyor Parts, I-Beams, & Metal Decking

Kyocera Taskalfa 3051 C1 Laser Printer, Machine No.6855Y15154, Paper & Assorted Toner Boxes

Blueprint Table & Cabinets, File Cabinet, Table, & (3) Chairs

Contents of Office; (2) Tables, File Cabinet, & (8) Computers

Contents of Office; (2) Tables, File Cabinet, & (8) Computers

Contents of Office; Desk, Table, (2) 2-Door Cabinets, File Cabinet, Refrigerator, & Computer

By Appointment Only.

All visitors to the ReEnergy site must make an appointment prior to the visit. ReEnergy is located on the Fort Drum Army Base and access is restricted. Visitors must complete and send the Sponsorship Application at least 24 hours prior to a visit. Visitors cannot have a felony on record in the past 10 years. Visitors will be subject to a background check and their vehicles will be thoroughly searched by Military Police.

Visitors should first report to the Fort Drum Visitor Control Center at the North Gate of the Base for processing. This processing takes at least 15 minutes.

Directions to the ReEnergy from I-81:

  • Take exit 48A off Interstate 81
  • Merge onto I-781
  • This is a direct route to the Fort Drum North Gate.
  • You must stop at the Visitor Control Center on the right just before the Fort Drum North Gate
  • Go inside to get you visitors pass, this will take approximately 15 minutes. 
  • Once through the gate, continue straight on S. Memorial Drive for over a mile.
  • Take a RIGHT on Euphrates River Valley Road.
  • The site is on the LEFT over a mile down Euphrates River Rd.  Look for the 235ft smokestack.

18% Buyer's Premium  

Thomas C. Bowling, Auctioneer  

Sign up below to receive
email alerts about THIS auction.

Notify Me

Notify Me

Sign up below to receive email alerts 
about THIS auction.